Setting The Animation Mode; Operating Pronto With The Cursor; Calibrating The Touch Screen - Philips Pronto User Manual

Setting the Volume Level of the Hard Buttons
To adjust the volume of the hard buttons, tap
Setup Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you press, the volume level increases with one step up to level 3.
Setting the Volume Level of the Touch Screen
To adjust the volume level of the touch screen, tap
second Setup Page.
You can either select 1 of the 3 volume levels or choose to mute. Every time
you tap, the volume level increases with one step up to level 3.

Setting the Animation Mode

Pronto provides navigation feedback through graphical animations of mode
transitions and page transitions. You can enable and disable the animations of
your Pronto in the Setup Page:
You can disable the animations by choosing 'None' (no animations). By
disabling all animations you use the absolute maximum of your Pronto's
processing speed.
When changing pages with the 'Page Only' animation, one page seems to
slide out of the screen, while the second page slides in.
The 'Mode Only' animation makes a page 'drop' out of the top of the touch
screen.
With the option 'Full' you can enable both animations at the same time.

Operating Pronto with the cursor

The cursor is used by default to operate your devices. However, you can also set
the cursor to browse through Pronto's devices and pages. For more information on
operating the Pronto with the cursor, see 'Operating Pronto with the cursor' on
page 33.

Calibrating the Touch Screen

When you first use your Pronto, the touch screen is already calibrated. However, if
you notice that your Pronto does not send out the commands in accordance with
what is indicated on the touch screen, it is advised to recalibrate the touch screen.
1 Tap
The 'Calibration' screen appears.
2 Tap
3 Tap the upper left corner on the touch screen.
4 Tap the lower right corner on the touch screen.
The touch screen is calibrated.
User Guide
in the second Setup Page.
in the 'Calibration' screen.
29
Customizing Pronto
in the second
in the