Table of Contents
Advertisement
3: The card is not recognised by the PC.
(The built-in memory is recognised.)
• Disconnect the USB connection cable
and then connect it again with the card
inserted into the camera.
4: The pictures cannot be printed with
the camera connected to printers.
• Is the printer supporting PictBridge?
– You cannot print pictures with printers
which do not support PictBridge.
(P85)
• Set [USB MODE] to [PictBridge (PTP)].
(P82)
5: Both ends of the picture recorded by
setting the picture size to [HDTV]
(1920t1080 pixels) are cut out.
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
• When using the printer with a trimming
feature or other feature which cuts out
both edges of the pictures, cancel the
feature for printing. The feature
depends on the printer used.
• Refer to the operating instructions of
the printer for details.
∫ Others
1: Unreadable language was selected by
mistake.
• Press the [MENU] button and select
[
] icon on the [
set the desired language.
2: The setting for the auto review
function is disabled.
• Is the camera in burst mode (P46), auto
bracket (P44) or motion image mode
[
] (P54)?
– In these cases, you cannot set the
auto review function in the [SETUP]
menu.
98
VQT0Q78
Others
SETUP] menu to
3: The lens clicks.
• When brightness has changed due to
the zoom or the movement of the
camera or other, the lens may click and
the picture on the screen may be
drastically changed, however, the
pictures are not affected.
The sound is caused by automatic
adjustment of the aperture.
It is not a malfunction.
4: The clock setting is reset.
• If you do not use the camera for a long
time, the clock setting may be reset.
When the message [PLEASE SET THE
CLOCK] appears, set the clock again.
• When you take a picture before setting
the clock, [0:00 0. 0. 0] is recorded.
5: Colours that were actually not around
the subject appear on the picture.
• On the camera, colour shift may appear
by the characteristic of the lens. This is
not a malfunction.
Advertisement
Table of Contents
