Panasonic Lumix DMC-LS1GN Operating Instructions Manual page 25

Panasonic digital camera operating instructions
Hide thumbs Also See for Lumix DMC-LS1GN:
Table of Contents

Advertisement

ECONOMY
(Economy mode only)
The battery life is saved by turning the LCD
monitor off automatically while the camera
is not in use. (P53) (Press any button to
recover from the economy mode.)
[LEVEL 1]: If you do not operate the
camera for about 15 seconds,
the LCD monitor is turned off.
[LEVEL 2]: If you do not operate the
camera for about 15 seconds,
or if you do not operate the
camera for about 5 seconds
after you take a picture, the
LCD monitor is turned off.
• The status indicator lights while the LCD
monitor is turned off.
• In the economy mode, [POWER SAVE] is
fixed to [2MIN.].
BEEP
[
]: No operational sound
[
]: Soft operational sound
[
]: Loud operational sound
• The operational sound setting also affects
simple mode [
].
CLOCK SET
Change date and time. (P22)
NO.RESET
Set this when you want to start the file
number of the picture from 0001 on the
next recording. (The folder number is
updated, and the file number starts from
0001.)
Preparation
• The folder number can be assigned from
100 to 999.
When the folder number reaches 999, you
cannot reset the file number. We
recommend formatting the built-in
memory or the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
the built-in memory or the card first and
then use this function to reset the file
number.
After that, the reset screen for the folder
number appears. Select [Yes] to reset the
folder number.
• Refer to P84 for detailed information about
the file number and the folder number.
• The file number reset also affects simple
mode [
].
RESET
The settings on the [REC] or the [SETUP]
menu are reset to the initial settings.
• The setting on [ROTATE DISP.] in the
[PLAY] mode menu is also reset. (P70)
• The settings on the type of battery, the
folder number and the clock setting are
not changed.
USB MODE
Set the USB communication system.
• Set before connecting to a PC or a printer.
(P82)
VIDEO OUT
(Playback mode only) (P81)
[NTSC]: Video output is set to NTSC
system.
[PAL]:
Video output is set to PAL
system.
25
VQT0Q78

Advertisement

Table of Contents
loading

Table of Contents