Advertisement
IV. Hardware Installation
II-1.
Router/PoE Switch
1.
Connect a router or PoE switch to the access point's LAN 1 port using an
Ethernet cable. PoE switches must be connected to the access point's LAN
1 port.
2.
If you are using a router, then connect the power adapter to the access
point's 12V DC port and plug the power
adapter into a power supply.
3.
If you are using a PoE (Power over
Ethernet) switch then it is not necessary
to use the included power adapter, the
access point will be powered by the PoE
switch.
Do not use the power adapter if you
are using a PoE switch.
4.
Connect a local network client or switch to the access point's LAN 2 port as
required.
The access point's LAN 2 port can support another powered
device(PD).
17
Advertisement
