Advertisement
When you change your access point's IP address, you need to use
the new IP address to access the browser based configuration
interface instead of the default IP
3.
To change the SSID of your access point's 2.4GHz wireless network(s), go
to "Wireless Setting" > "2.4GHz 11bgn" > "Basic". Enter the new SSID for
your 2.4GHz wireless network in the "SSID1" field and click "Apply".
To utilize multiple 2.4GHz SSIDs, open the drop down menu
labelled "Enable SSID number" and select how many SSIDs you
require. Then enter a new SSID in the corresponding numbered
fields below, before clicking "Apply".
4.
To configure the security of your access point's 2.4GHz wireless
network(s), go to "Wireless Setting" > "2.4GHz 11bgn" > "Security". Select
an "Authentication Method" and enter a "Pre-shared Key" or "Encryption
Key" depending on your choice, then click "Apply".
If using multiple SSIDs, specify which SSID to configure using the
"SSID" drop down menu.
8
192.168.2.2.
Advertisement
