Advertisement
I-4. LED Status
LED Status
Off
Blue
Amber
I-5. Reset
If you experience problems with your access point, you can reset the device
back to its factory settings. This resets all settings back to default.
1.
Press and hold the reset button on the access point for at least 10 seconds
than release the button.
You may need to use a pin or similar sharp object to push the
reset button.
2.
Wait for the access point to restart. The access point is ready for setup
when the LED is blue.
4
The access point is off.
The access point is on.
The access point is starting up.
Description
Advertisement
