Configuring User Tunnel - D-Link DIR-620 Quick Installation Manual

Wireless n300 router with 3g/cdma/lte support and usb port

Hide thumbs Also See for DIR-620:

Table of Contents

DIR-620

Configuring User Tunnel

Create your WAN connection in accordance with data provided by your ISP.

Then create a connection of the PPTP or L2TP type.

1. Go to the Net / WAN page and click the Add button.

From the Connection Type drop-down list, select the needed value.

3. Make sure that the auto value is selected from the Interface drop-down

list.

Specify a name for your connection (any name for easier identification) in

the Name field.

In the VPN section, enter authorization data to connect to a remote server

(the username (login) in the Username field and the password in the

Password and Password confirmation fields), or select the

Without authorization checkbox if authorization is not required. In the

VPN server address field, enter the IP or URL address of the PPTP or

L2TP authentication server.

6. Click the Apply button.

Quick Installation Guide

Table of Contents

Dsl-2650u