Compatibility - ACR Systems LINK User Manual

COMPATIBILITY

Our system is compatible with every gimbal that can receive a PWM or SBUS signal. The current
list of compatible stabilizers is as follows:

ACR The Plus (previously BeSteady ONE Plus)

BeSteady ONE

ACR The Beast (previously BeSteady FOUR)

FreeFly MoVI M5 – future feature

FreeFly MoVI M10 (both versions) – future feature

FreeFly MoVI M15 – future feature

DJI Ronin

DJI Ronin M

BaseCam SBGC based gimbal with 8-bit or 32-bit CPU, with or without encoders, that has
got S.BUS or PWM sockets
If you are concerned whether your gimbal is compatible with The Link, check your User Manual if
your device is equipped with PWM or SBUS connectivity, If your gimbal is based on
SBGC / AlexMos technology you only need to have the remote socket on your main board and a
few moments of configuration.
www.acr-sys.com
THE LINK - MANUAL
Page: 8