Firmware Update - ACR Systems LINK User Manual

FIRMWARE UPDATE

Always be sure that you have the latest firmware version. Latest firmware is available at
http://acr-sys.com/support/#software.
Remember that you always need to update both client and host units.
To update The Link firmware you need to take following steps:

Connect USB cable to your PC.

Hold down B button on The Link you want to update.

Plug USB cable in The Link.

Mass Storage will open on your PC.

Copy "link.hex" file to Mass Storage.

After file is copied unplug USB cable.

Power The Link and the update process will start (LED A and LED B flashing red) – it will
take about 120 seconds.
www.acr-sys.com
THE LINK - MANUAL
Page: 23