Different Visible Signals; Diode A; Diode A+B; Special Actions - ACR Systems LINK User Manual

DIFFERENT VISIBLE SIGNALS

DIODE A

●●●●●●●●● Service Mode initiated

DIODE A+B

●◌●◌●◌●◌● Gyro calibrating in progress
diodeA ● diodeB ● Writing on Mass Storage
Both alternately ● Currently flashing firmware

SPECIAL ACTIONS

long click button B + USB
one short click buttons A+B
roll angle above 60
www.acr-sys.com
Enter Service Mode
Gyro calibration – The Link must not be moved during calibration
Activate sleep mode
THE LINK - MANUAL
Page: 21