Advertisement
Operation
Point the transmitter towards the receiver kit and press "SET"
switch. The TIMER indicator (green) on receiver is turned ON.
TIMER
COOL
ON
5.6 EMERGENCY OPERATION
N O T E
•
The setting temperature and the fan speed for cooling/heating
operation are the same as before starting emergency opera-
tion.
•
During the emergency operation, "
(0.5 second ON / 0.5 second OFF).
Function
"COOL" and "HEAT" switches are used for emergency operation
when the batteries for wireless remote control switch are shor-
tage.
5.7 OPERATION WITH WIRED REMOTE CONTROL SWITCH
The indoor unit can be operated by both wired and wireless remote control switches. Contact your distributor and contractor for detail.
5.8 AUTOMATIC OPERATION
Refer to the installation and operation manual of the indoor unit.
9
PMML0314A rev.0 - 09/2013 - P5415315
Stop flashing
" lamp (yellow) flashes
Wired remote
control switch
(PC-ARF)
Cancel setting
To cancel the timer setting, point the transmitter towards the
receiver kit and press "CANCEL" switch. The TIMER indicator
(green) on receiver is turned OFF.
COOL
TIMER
FILTER DEF
EMERGENCY
HEAT
Switch "HEAT
Switch "COOL": Press "COOL" so that the cooling operation is
started. Press "COOL" again so that the cooling operation is sto-
pped.
Switch "HEAT": Press "HEAT" so that the heating operation is
started. Press "HEAT" again so that the heating operation is sto-
pped.
Wireless remote
control switch
(PC-LH3B)
RUN
COOL
Switch "COOL"
Advertisement
