Advertisement
Installation
b. Press the service hole to remove the remote control switch cover.
2 Remote Control Switch Covers
5 Attach the receiver kit to the lower cover.
a. Insert the receiver kit and the connecting cable to the position for receiver kit.
b. Lead the connecting cable through the hole for connecting cable.
c. Catch 3 hooks of receiver kit onto the square holes.Pay attention to the direction of receiver kit when it is attached.
Receiver Kit
N O T E :
Check whether the receiver kit is securely fixed.
6 Lead the connecting cable into the electrical box with other wires.Attach the accessory insulation to the edge of side cover R in
order to prevent a scratch by contacting the connecting cable to the edge of side cover R.
Lower Cover
4
Attaching DIrection for
Receiver Kit
Side Cover R
Lower Cover
PMML0314A rev.0 - 09/2013 - P5415315
Press here by screwdriver or a stick to remove the
remote control switch cover
Position for Receiver Kit (It can be attached to both
of right side and left side)
Hook
Receiver Kit
Side Cover R
Put the side cover R and the flange at
lower cover between insulations.
Connecting Cable for Receiver Kit
Service Hole
Hole for Connecting
Cable
Hook
Insulation
Advertisement
