GE 24 Owner's Manual And Installation Instructions page 21

B. Remove the hinge cover on top of the left
fresh food door by removing the screw using
a Phillips screwdriver.
C. Unplug the 3 wire connectors and move the
wires until you can see the screws holding the
hinge.
For Ice and Water Models Only: Pull the
water line very carefully.
Wire
Connectors
D. Using a 5/16" socket/ratchet driver, remove
the bolts securing the top hinge to the
cabinet.
Wire Connectors
Bolts
Installation Instructions
Water Line
(Ice and Water
Models Only)
Water Line
(Ice and
Water
Models
Only)
For NON Ice and Water Models Only: Lift the
hinge straight up to free the hinge pin from
the socket in the top of the door and pass the
wire through the slot in the hinge. For Ice and
Water Models Only: Do not remove hinge
from the door.
E. Remove the tape from the door, open the door
90 degrees and tilt the door away from the
cabinet. Lift the door off the center hinge pin.
F. Set the door on a non-scratching surface with
the inside up.
3
REMOVING CENTER HINGES AND BRACKETS
A. Using a 1/4" Allen wrench, remove the 2 hinge
pins from the hinge brackets.
B. Using a 5/16" socket/ratchet driver, remove
the bolts securing the center hinge brackets
to the cabinet.
21