Overhang Mounting Brackets (Table 1 - Number Of Brackets By Awning Size) - SunSetter 1000XT Owner's Manual & Installation Instructions

Option 2 - With a gutter on the Fascia and no room
for the Awning Rail or Upper Brackets, a Board can be
mounted in front of the Gutter using our Overhang
Mounting Brackets secured to the Rafters under the
Overhang. The number of Brackets, which can be
purchased separately, will vary according to the width
of the Awning. See Figure 38.
WARNING: THE OVERHANG MOUNTING BRACKETS
MUST BE SECURELY FASTENED TO THE RAFTERS AND
POSITIONED EVENLY ALONG THE BOARD. FAILURE
TO DO SO MAY RESULT IN THE COLLAPSE OF THE
STRUCTURE, WHICH COULD CAUSE PERSONAL
INJURY.
Option 3 - The Awning can be mounted under an
overhang if desired. A predetermined set of Overhang
Brackets, (See Table 1) depending on the size of the
Awning, must be purchased separately. A Board must
be secured to the overhang so that the Awning is in
the desired location. Remember to mount the Wall
Brackets accordingly as noted in the Floor Mount /
Wall Bracket Options section.
WARNING: THE OVERHANG MOUNTING BRACKETS
MUST BE SECURELY FASTENED TO THE RAFTERS AND
POSITIONED EVENLY ALONG THE BOARD. FAILURE
TO DO SO MAY RESULT IN THE COLLAPSE OF THE
STRUCTURE, WHICH COULD CAUSE PERSONAL
INJURY.
Note: If mounting Upper Brackets to Facia or 1" x
4" Board using Overhang Mounting Brackets, you
may choose to replace the supplied 1/4" x 3" Lag
Screws with shorter lag screws or machine bolts with
washers/nuts (not supplied).
Fascia
Gutter
Awning
Rail
Upper Bracket
Figure 38 1x4 Board
Fascia
Awning
Rail
Upper Bracket
1x4 Board
Figure 39
Overhang Mounting Brackets
Awning Size Number of Brackets
7'-8'
9'-11'
12'-14'
15'-17'
18'-20'
Table 1
16
HOUSE
Overhang
Mounting
Bracket,
Face Up
HOUSE
Overhang
Mounting
Bracket,
Face Down
3
4
5
6
7