Filling The Water Tank - Homemaker MH-MF40A User Manual

4 Filling the Water Tank

Warning: Unplug the appliance during filling and cleaning.
• To Fill the Water Tank, turn it upside down to access the filer cap.
Unscrew the filler cap and lift it up to remove. Note the filler cap is tight so as to
•
prevent any water leaks. If needed, use a towel to grasp the cap and twist
anticlockwise to unlock.
• Fill the tank through the filler hole until the water level is within a few millimetres
from the filling hole.
• Refit the filler cap and turn clockwise to lock in place. Important: Ensure the filler
cap is fully rotated and locked in place.
DO NOT fill with any liquid other than clean
fresh cold water.
DO NOT add any additives to the water.
NOTE: There is a Valve in the filler cap which
releases the water when placed back on to the
Misting Generator. Do not tamper with this
valve.
• Place the Water Tank back on top of the Misting Generator.
Caution:
If water is spilled on the floor, immediately wipe it up and dry the floor so as
to prevent any injury from slipping over.
Page 13 of 20