Table of Contents
Advertisement
•
Place the Fan Blade onto the motor spindle.
Note: The groove in the rear centre of the fan blade aligns with a T-bar on the motor
spindle to ensure correct positioning.
•
Fix the blade into place by gently hand tightening the Clear Plastic Nut
Anticlockwise onto the end of the motor spindle. The Clear Plastic nut is self-
tightening when the motor starts so do not force it, just nip it up.
•
Remove the Small Nut and Bolt from the grille by unscrewing the nut anticlockwise.
Page 10 of 20
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the MH-MF40A and is the answer not in the manual?