List Of Menu Items And Settings - Panasonic AW-RC400E Operating Instructions Manual

Menu settings

$ List of menu items and settings

Menu item
PRIORITY
DIRECTION
SPEED WITH ZOOM POS.
MEMORY LENGTH
PRESET SPEED
IRIS CONTROL
ROTATION SWITCH
OPTION SWITCH
CONTROL SELECT MODE
MONITOR2 SELECT
BUZZER
AUTO RUN
SD CARD
PRIORITY (MASTER/SLAVE)
When two AW-RP400 pan/tilt head controllers have been connected, the priority of the CONTROL SELECT buttons is to be
set.
When MASTER is selected as the setting, the master AW-RP400 has priority; when SLAVE is selected, the slave AW-RP400
has priority.
If the AW-RP400 controller with a high priority has selected the pan/tilt heads, which were selected by the AW-RP400
controller with a low priority, the CONTROL SELECT button lamps on the AW-RP400 controller with the low priority start
flashing to indicate that the control rights have been ceded to the other controller. This setting is performed using the master
AW-RP400 controller.
Setting
MASTER, SLAVE
PAN
TILT
ZOOM
NORMAL, REVERSE
FOCUS
IRIS
ROTATION
OFF, 1, 2, 3
60s, 120s, 300s, 600s
1 to 25
BOTH, RP400, CB400
ROTATION, FOCUS, ZOOM, IRIS
A
B
C
NOT USE, LAMP, EFROSTER, WIPER,
D
HEATER/FAN, AF, ND, OPTION,
E
EXTENDER
F
G
H
INTERLOCK, UN-INTERLOCK
(When the controller CB400, SLAVE
is the master)
(When the controller RP400, CB400
is the slave)
OFF, ON
START No. 1 to 50
END No. 1 to 50
INTERVAL 1s to 30s
OPERATE STOP, RUN
STORE, LOAD
26 (E)
Pan/Tilt Head Controller AW-RP400
Description Initial value
MASTER
NORMAL
OFF
60s
25
BOTH
ROTATION
NOT USE
INTERLOCK
CB400
RP400
ON
1
50
1s
STOP
– – –