User Settings - Panasonic LJ-SK84A User Manual

Residential storage battery system

Hide thumbs Also See for LJ-SK84A:

Table of Contents

Battery System User Manual for Panasonic LJ-SK84A

To activate the emergency back-up power supply during a power failure, press the ON/OFF button for 1 second until you

see PF followed by 3 hyphens. Press the ON/OFF button again for 1 second to activate the back-up operation.

If the emergency power outlet has been used during a power cut, remember to switch it back to grid operation mode

once power is restored to your home. For safety reasons, the battery system will not switch back automatically to grid

operated mode after the power back-up function is used.

The MODE indicator light will be orange to show that the battery is still in back-up mode and the GRID light will be

blinking green to indicate that it is waiting for power restoration. To start normal operation, first press the ON/OFF button

for 1 second until you see 5 hyphens in the display. Now, press the ON/OFF button again for one second to start the

battery. You should see a solid (non flashing) number between 0.0 and 2.0 in the display.

Good to know: The emergency back-up power outlet will only work if there is sufficient charge in the battery. A lower

discharge limit can be set which will guarantee that the battery will always have a minimum remaining level of electricity

stored in case of a power cut. However, this will also reduce the available capacity for day to day power cycling.

If you experience frequent power cuts in your area you can set the lower discharge limit to an appropriate level.

Example: If you want to ensure that you are able to charge your laptop (50 W) and keep your router (30 W) running

during a power cut you need 80 Wh (watt hours) of storage to bridge one hour without power. As 80 Wh equal 1.% of the

battery's capacity, you would have to set your lower discharge limit to greater than 1% to ensure there is backup power

to remain connected for one hour. If you set your lower discharge limit to 5% you could charge your laptop and stay

connected to the internet for 5 hours.

6.7 User settings

To access the User Settings you first need to stop the battery operating by pressing the ON/OFF button for 1 second.

Grid Tied PV System – User Manual

Table of Contents