System: Maintenance - Swann GuardianEye Instruction Manual

System: Maintenance

Enable auto reboot:
It's recommended to leave this enabled as it main-
tains the operational integrity of your NVR.
Auto reboot at:
Choose an appropriate day and time to reboot your NVR.
Upgrade From Local: Click this to upgrade the firmware from a local
source such as a USB flash drive. Select the firmware file, click "Up-
grade" then "OK" to confirm. When the firmware upgrade has complet-
ed, your NVR will reboot automatically.
Check From Cloud:
Click this to check if an updated firmware is avail-
able using your Internet connection. A message will appear on-screen
informing you if an update is available. Click the "Upgrade" button to
proceed then follow the on-screen instructions.
Upgrade IPC From USB:
Click this to upgrade the camera's firmware
from a local source such as a USB flash drive (see above right screen-
shot). To upgrade the firmware, click "Browse", select the firmware file
then click "OK". Repeat these steps for each camera displayed. When
finished click "Upgrade". Each camera will restart when the upgrade
has completed.
Default Settings:
Click this to restore factory default settings. All re-
cordings on the hard drive will remain.
• Click the "Default" button to revert back to default settings.
• Don't forget to click "Apply" to save settings.
26