register ID of 3002.
Command: FKR
Argument 1: Function Key ID to recall.
Argument 2* ~ XX: Layer ID(s) to be included in relative function key.
Request PixelSpace Definitions
This command returns a list of all PixelSpaces currently defined in the Spyder system.
Syntax: RPD
Response: <Result Code> <Count> [<ID> <Name> <Current Background> <Next Background> <X Position>
<YPosition> <Width> <Height> <RenewalGroup ID>]...
Command: RPD
Aspect Ratio Offset
This command is used to adjust the aspect ratio offset KeyFrame parameter of one or more
layers. This aspect ratio command can be used to set the total aspect ratio for a layer, or can
adjust KeyFrame aspect ratio offset directly.
Command: ARO
Argument 1: A/R Type (t = set total A/R, o = set KeyFrame A/R offset, a = adjust existing
KeyFrame A/R offset).
Argument 2: Floating point aspect ratio value (Ex: 0.17).
Argument 3 ~ XX: Layer ID(s) to apply aspect ratio offset to.
Input Level Adjust
This command allows for adjustment of brightness, hue, contrast, and saturation on any layer in
the system.
Command: ILA
Argument 1: Brightness (0.0 – 2.0)
Argument 2: Contrast (0.0 – 2.5)
Argument 3: Hue (‐180 – 180)
Argument 4: Saturation (0.0 – 2.0)
Argument 5 ~ XX: Layer(s) to apply settings to.
Input Luminance Key
This command allows for enabling, disabling, and adjustment of the luminance key for one or
more Spyder layers. If disabling key with this command, all key specific arguments will not be
used, and should be set to zero. Note that this command is mutually exclusive with the 'Input
Color Key' command (below). If this command is used, color key will automatically be disabled.
Command: ILK
Argument 1: Key enabled (0 = Off, 1 = On)
Argument 2: Clip (0 – 512)
Argument 3: Gain (0 – 512)
Argument 4 ~ XX: Layer(s) to apply settings to.
Input Color Key
This command allows for enabling, disabling, and adjustment of the color key for one or more
Spyder layers. If disabling key with this command, all key specific arguments will not be used,
27