Treatment Recall
This command recalls a treatment to one or more specified layers.
Command: KTR
Argument 1: Treatment ID to recall
Argument 2 ~ XX: Layer ID to recall treatment to
Load Still on Layer
This command loads a specified file onto one or more specified layers.
Command: SLD
Argument 1: File name to load
Argument 2 ~ XX: Layer ID to load still image on
Clear Still on Layer
This command clears any loaded still image from one or more specified layers.
Command: SCL
Argument 1 ~ XX: Layer ID to clear still image from
Load Still on Background
This command loads a specified file onto either the current or next background layer. The image
name specified will automatically be scaled to fit the PixelSpace if the image is not the same size
as the PixelSpace it is being loaded on.
Command: BLD
Argument 1: File name to load
Argument 2: PixelSpace ID to load to
Argument 3: 0 = Load Next / 1 = Load Current
Transition Background
This command transitions the background layers across all PixelSpaces defined in the system.
Note that it is not possible to transition individual PixelSpace backgrounds.
Command: BTR
Argument 1*: Transition duration (in frames)
Border Adjust
This command forces adjusts one or more specified border properties on a specified layer. Note
that the color specific arguments are optional, but all 3 (RGB) must be specified to be processed.
Command: KBD
Argument 1: Layer ID to adjust
Argument 2: Border Thickness (‐255 – 255, negative for outside softness)
Argument 3*: Color Red (0‐255)
Argument 4*: Color Green (0‐255)
Argument 5*: Color Blue (0‐255)
Argument 6*: H‐Bevel offset (0‐255)
Argument 7*: V‐Bevel offset (0‐255)
Argument 8*: Inside Softness (0‐255)
Shadow Adjust
This command adjusts the shadow parameters for a specified layer
25