Vista Spyder 200 Series Operation Manual page 24

Command: TRN
Argument 1: 0 = Mix Off ‐ 1 = Mix On
Argument 2: Transition Duration (in frames)
Argument 3 ~ XX: Layer ID to transition
Layer Size Change
This command sets the horizontal size of one or more specified layers. Vertical size adjusts
automatically to ensure the layer's aspect ratio.
Command: KSZ
Argument 1: Horizontal Size (in pixels)
Argument 2 ~ XX: Layer ID to set size
Layer Position Change
This command sets the horizontal and vertical position of one or more specified layers.
Positions are mapped in pixels, relative to the top left PixelSpace corner associated with the
layer. Position changes can be relative to the layer's current position, or can be an absolute
position setting.
Command: KPS
Argument 1: 0 = Absolute Position / 1 = Relative Position
Argument 2: Horizontal Position
Argument 3: Vertical Position
Argument 4 ~ XX: Layer ID to set position
Layer Size and Position Change
This command sets the horizontal and vertical position of one or more layers, as well as their
size. In cases where size and position are being modified simultaneously for an application, this
command is recommended over using the individual layer size and position commands. Position
and size changes can be relative to the layer's current position, or can be an absolute position
setting.
Command: LSP
Argument 1: 0 = Absolute Position / 1 = Relative Position
Argument 2: Horizontal Position (Pixels)
Argument 3: Vertical Position (Pixels)
Argument 4: Horizontal Layer Size (Pixels)
Argument 5 ~ XX: Layer ID(s) to set
Treatment Learn
This command learns keyframe attributes from a specified layer.
Command: KTL
Argument 1: Treatment ID to learn (‐1 for next available)
Argument 2: Layer ID to learn from
Argument 3*: Learn Position
Argument 4*: Learn Crop
Argument 5*: Learn Clone
Argument 6*: Learn Border
Argument 7*: Learn Shadow
24