Inputs; Outputs - Vista Spyder 200 Series Operation Manual

Inputs
Below are listed the standard video formats accepted by Spyder
•
24p, NTSC, PAL, and SECAM
•
Analog RGB (SOG, Composite or Separate Sync)
•
Analog YUV
•
SDI
•
HD‐SDI
•
DVI‐Single Link
o DVI‐Dual Link
Each input module has a single input connector for the supported signal types:
•
ANALOG
•
SDI/ HD‐SDI
•
DVI
•
Composite and S‐Video (Comp/ S‐Vid Optional)
Each input is universal: an input can be dynamically assigned and used as a mixer, a mixer, or a
key. These settings are also accomplished from the chosen control type.
Outputs
Each Output Module has various video connectors on the rear. Conditions exist
when multiple output types can be utilized.
Below are listed the standard video formats accepted by Spyder
•
24p, NTSC, PAL, and SECAM
•
Analog RGB (SOG, Composite or Separate Sync)
•
Analog YUV
•
SDI
•
HD‐SDI
•
(2) DVI‐Single Link
•
(2) DVI‐Dual Link
o DVI Twin Link
Each output module has a single connector for the supported signal types:
•
ANALOG
•
SDI/HD‐SDI
11