Options - Vista Spyder 200 Series Operation Manual

•
DVI
•
DVI –Dual
•
Composite and S‐Video (Comp/S‐Vid Optional)
Multiple output connector types can be used simultaneously, provided that the video format is
valid for the specific video connections. Below are a few examples.
•
DVI & Analog: When an output is configured for Non‐Interlaced Computer Signals
•
SDI & Analog: When configured for 480i/575i
•
HD‐SDI & Analog: When configured for 1080i
Options
Spyder options listed below are available on either 200 or 300 Series products.
Existing units can be retrofitted once shipped but must be returned to the factory for any of
these procedures.
200X/300X Expansion Option
Allows multiple units to be connected together to expand Inputs, Outputs or both. (See Figure
3.3.1 b on following page)
This cable allows multiple Spyder units to be connected to the Expansion Ports. This option is
only applicable with the 200X or 300X Option.
200C/300C (Composite/S­Video Option)
When selected this option will provide Composite (BNC) and S‐Video
(SVHS) connections on each Input and each Output of the Spyder unit.
InfiniBand Cable (Vista P/N CAB‐60670)
12