Table of Contents
Advertisement
Controls and Their Functions
Audio Function Section (1)
Audio Function Section (2)
AUDIO LEVEL CH1 (audio channel 1 recording level) control
When the AUDIO SELECT CH1/CH2 switch
channel 1 can be adjusted by this control in addition to the AUDIO LEVEL CH1 control
the side panel.
MIC IN (microphone input) jack (XLR, 3-pin)
Connect an optional microphone to this jack. The power for the microphone is supplied from
this jack.
AUDIO LEVEL CH1/CH2 (audio channel 1/2 recording level) controls
When the AUDIO SELECT CH1/CH2 switch
1 and 2 can be adjusted using these controls.
However, the audio CH1 level can also be adjusted using the AUDIO LEVEL CH1 control
the front panel.
AUDIO SELECT CH1/CH2 switch (audio channel 1/2 auto/manual level adjustment selec-
tor) switch
This selects the method used to adjust the audio levels of audio channels 1 and 2.
AUTO: For adjusting the levels automatically.
MAN:
For adjusting the levels manually.
AUDIO IN (audio input selector) switch
This selects the input signals to be recorded on audio channels 1 and 2.
FRONT [MIC]: The microphone input signals connected to the MIC IN jack
The microphone input signals connected to the AUDIO IN CH1/CH2 connec-
REAR [MIC]:
tors
are recorded.
REAR [LINE]: The line input signals connected to the AUDIO IN CH1/CH2 connectors
recorded.
AUDIO IN CH1/CH2 (audio input channel 1/2) connectors (XLR, 3P)
An audio component or microphone is connected here.
AUDIO OUT connector (XLR, 3P)
This is connected to an audio component. The audio channels can be selected on the setting
menu.
DC OUT (DC power output) connector
This is the DC 12 V output connector. A current of approximately 100 mA can be taken out.
- 1 2 -
is set to MAN, the recording level of audio
is set to MAN, the audio level of audio channels
on
on
are recorded.
are
Hide quick links:
Advertisement
Table of Contents
