Panasonic AJ-D700P Operating Instructions Manual page 85

Protecting stored data
If the setup card' s WRITE PROTECT switch is set to ON, data is not rewritten even if the UP (or
DOWN) button is pressed in step 4.
When data is not written
If the following error messages appear when the UP (or DOWN) button is pressed in step 4, the
data is not written.
Data writing error messages
Error message
NO CONFIG The setup card is not
formatted.
NO CARD A setup card is not
inserted.
WRITE PROTECT The write protect switch on
the side of the card is set to
ON.
ERROR Data cannot be written on
the card.
Condition
- -
85
Set to ON.
Countermeasure
Format the card.
Insert a card.
Set the write protect switch
on the side of the card to
OFF.
The card may be defective.
Replace the card.