Panasonic AJ-D700P Operating Instructions Manual page 106

Setting Menu Screens
SET UP CARD Screen
This page sets the loading, saving and formatting operations for setup cards. Align the " –" with the desired item and press the
UP or DOWN button to perform the corresponding processing.
– SET UP CARD –
READ ( CAM)
WRITE ( CARD)
CARD CONFIG.
ID READ/WRITE :ON
FUNCTION1~2R/W:ON
L/M/H SET R/W :ON
LEVEL 1~6 R/W :ON
*For example, so as not to change the CAMERA ID when reading from, or writing to the SET UP CARD, the ID READ/WRITE
should be selected to OFF.
The underlined setting in the Variable range column indicates the preset mode.
Menu screen display methods
USER menu: Setting the MENU switch to SET displays the USER menu.
ENG menu: Holding down the SHIFT/ITEM and UP buttons simultaneously and setting the MENU switch to SET displays the
ENG menu.
Variable
Item
range
READ( CAM)
WRITE
( CARD)
CARD CONFIG.
ON
ID READ/WRITE
OFF
ON
FUNC1~2 R/W
OFF
L/M/H SET R/W ON
OFF
LEVEL1~6 R/W ON
OFF
- 1 0 6 -
VF
Remarks
display
USER Setup card data is written to the unit.
ENG
Camera data is written to the setup
USER
ENG card.
USER The setup card is formatted.
ENG
CAMERA ID READ/WRITE is switched
USER
ENG ON or OFF when data is read from or
written on the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
USER
READ/WRITE for FUNCTION1 and
ENG
FUNCTION2 is switched ON or OFF
when data is read from or written on the
set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
USER READ/WRITE for LOW SETTING, MID
ENG SETTING and HIGH SETTING is
switched ON or OFF when data is read
from or written on the set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.
READ/WRITE for LEVEL 1/6,2/6,3/6,
USER
4/6, 5/6 and 6/6 is switched ON or OFF
ENG
when data is read from or written on the
set-up card.
ON: Read/write is enabled.
OFF: Read/write is disabled.