Panasonic AJ-D700P Operating Instructions Manual page 109

FUNCTION 3/5 Screen
This page performs the adjustment function 3 settings.
– FUNCTION 3/5 –
HUMID OPE :OFF
26P CONTROL :OFF
REC START :NORMAL
TC MODE :DF
:USER
UB MODE
PAUSE TIMER :30
BATTERY SEL :NiCd-12
TCG VF DISP :OFF
*Even if the BATTERY SEL is selected to NiCd-12, 13 or 14, the camera automatically senses whether or not an Anton Bauer's Intelligent Battery
is fitted. In the case of an intelligent battery, a numerical indication (percentage) of power available is displayed in the viewfinder. If the camera is
usually used with an intelligent battery, BATTERY SEL should be set to DIGITAL.
Variable
Item
range
ON
HUMID OPE
OFF
OFF
26P CONTROL
BOTH
ON
ALL
REC START
NORMAL
TC MODE DF
NDF
USER
UB MODE
REAL
EXT
10
PAUSE TIMER
20
30
NiCd-12
BATTERY SEL
NiCd-13
NiCd-14
DIGITAL
ON
TCG VF DISP
OFF
- 1 0 9 -
VF
Remarks
display
ENG VTR operation selection when
condensation occurs.
ON: Operation continues normally.
OFF: All operations prohibited except
for POWER switch and EJECT
button.
26P remote control selection
ENG
Unit only (26P control does
OFF:
not function.)
BOTH: Unit and 26P remote control
(TALLY LED indicates unit
REC status.)
ON: 26P remote control only
(TALLY LED indicates 26P
VTR REC status.)
REC acceptance selection for VTR
ENG
START/STOP
ALL: REC accepted regardless
of VTR mode.
NORMAL: REC accepted only during
STOP (POWER SAVE)
mode and REC PAUSE
mode.
ENG Time code DF/NDF switching
DF: Drop frame mode
NDF: Non-drop frame mode
ENG LTC UB usage method selection
USER: User setting (fixed value)
REAL: Real-time operation according
to the TIME DATE time
EXT: When there is external TC
input, the UBG value is slave
locked. (When there is no
external input, the user setting
is used .)
Selection for the recording/pause hold
ENG
time.
10: 10 minutes
20: 20 minutes
30: 30 minutes
ENG Battery type selection*
NiCd-12: 12 V Nicad battery
'
NiCd-13: 13 V Nicad battery
NiCd-14: 14 V Nicad battery
DIGITAL: Digital battery
ENG Viewfinder time code display ON/OFF
ON: Time code is displayed.
OFF: Time code is not displayed.