Password: ldk24 : this value is assigned by service provider
You do not need to make changes to the other default settings. Click on Apply. The WAN
connections page is displayed, containing details of the new PPPoE transport..
From the left-hand menu, click on Configuration>Save config. At the Save
g.
configuration page, click on Save.
After this configuration has been completed, if you want to set "NAT or Firewall",
Note –
refer to the 3.4 Security configurations for NAT and 3.5 Security configurations for
Firewall
D.2 Ethernet – Ethernet routed
Before you setup this configuration If you want to change default LAN IP address, refer to
Annex C : Changing default LAN IP address.
You can set "Ethernet routed" by following instructions.
a. From the left-hand menu, click on Configuration>WAN connections
Refer to the figure-5.
b. When you click on Configuration>WAN connections., if asking for username and
password, type username "admin" and password "admin".
Refer to the figure-6.
LDK24 ADSL Router User's Manual
Version 1.0D
<figure -external-pppoe2>
Copyright© 2002 LG Electronics Inc., LTD.
Page 63 of 67