Clock - Monogram ZET2S Owner's Manual

Power
If a flashing time of day is in the display,
you have experienced a power failure.
failure
Reset the clock.

Clock

The clock must be set for the automatic oven
timing functions to work properly.
The time of day clock cannot be changed during
Delay Start. (It can be changed during a regular
bake or broil operation.)
To set
1 Push the CLOCK button.
the clock
2 Turn the Mini-Knob to select the time of day
Control
Allows you to lock out all controls so that
the Oven Mode knob, Temperature knob and the
lockout
control panel buttons cannot be activated when
set.
NOTE: On double oven models, this activates this
feature for both ovens.
To lock/unlock the controls:
1 Push and hold the COOK TIME and DELAY
2 To unlock, push and hold the COOK TIME and
When this feature is on and the controls are
attempted to be set, the display will show "Loc."
NOTES:
• If locked while a cooking, cleaning or timed function
• The adjustment will be retained in memory after a
28
and push it to enter.
NOTE: While setting, the time will roll around
from AM to PM.
START buttons at the same time for 3 seconds
until the control beeps and the display shows
"Loc." After locking the controls, the time of day
will appear in the display.
DELAY START buttons at the same time. ("Loc"
will appear in the display). Hold for 3 seconds
until the control beeps and "Loc" disappears
from the display.
are in operation, they will be cancelled.
power failure.
Clock and Control Lockout Features
Wall Oven
Double oven display shown.
Push to
select
Double oven display shown.
Mini-Knob
Turn to select
Push to enter
Push and hold
at the same
time to lock/
unlock