Samsung NC10 User Manual page 92

Click General tab and select a LAN
5
driver from Connect using:. Select
Internet Protocol(TCP/IP) and click
Properties.
The displayed LAN driver may vary
depending on the LAN device type.
Click Install to add a network
component as shown in the figure
below: You can add a client, a
service, or a protocol.
Configure IP settings.
6
Select Obtain an IP address
automatically when using DHCP. If
you use a static IP, select Use the
following IP address and enter the
values.
If the IP of your computer is not
automatically assigned, contact the
network administrator.
If all settings are made, click OK. Now
7
the network configuration is finished.
1