Samsung NC10 User Manual page 185

For more information on the AP
settings, see the owner's manual
supplied with the AP.
Q
Although a connection has been
established, I cannot connect to
the Internet.
 Check the TCP/IP settings.
A If you cannot connect to the Internet
but you are connected to an AP,
check if the TCP/IP settings are
configured properly.
When you are not connected to an
AP, an X mark appears over the
'Wireless Network Connections' icon
in the Taskbar. If you double-click
the icon, the Search for Wireless
Connections window appears.
Reconnect to a wireless network
referring to the descriptions of
Connecting to a Wireless LAN in
the Using the Network section.
When you are connected to an AP, an
X mark appears over the "Wireless
Network Connections" icon
Taskbar. Double-click the icon and
check if the IP address is properly
allocated on the Support tab. If the
IP address is not properly allocated,
the IP address will be displayed as
follows; (for example, 1..xxx.
xxx).
If your network does not support
DHCP, you have to manually
configure an IP address by asking
your network administrator.
In addition, even if your network
supports DHCP, the Internet
connection may not be available if the
DHCP server fails to allocate an IP
address to your computer.
I have configured both wired and
Q
wireless connections with the
same IP address, but the network
connections do not work properly.
A You cannot use the same IP address
for wired and wireless connections.
To use only one IP address for both
wired and wireless connections, you
must disable one of them according
to your requirements in Network
Connections in the Control Panel.
in the
18