Samsung NC10 User Manual page 173

User Data Backup/Restore
Data Backup enables you to save
specific files or folders onto another drive
or DVD. Data Restore enables you to
restore data using the data saved by
a Data Backup when data is lost. This
guide describes the Backup and Restore
procedures on the basis of backing up
and restoring by using DVD.
 Data Backup
Click Start > All Programs >
1
Samsung > Samsung Recovery
Solution > Samsung Recovery
Solution.
When you cannot start Windows,
turn the computer on and press the
F4 key in the boot screen to enter
restoration mode.
2
When the initial menu screen
appears, click Backup and then click
Data Backup.
3
In the data selection screen, select
either Basic Selection or Select
from all, select a folder or file to be
backed up, and then click the Next
button.
Enter a description for the backup in
4
the Description field so that you can
easily recognize it later and specify
the Save Path. If your computer has a
DVD-Writer, you can specify the DVD
drive as the Save Path.
If you have specified a hard disk
drive or a removable disk as the
Save Path, the SamsungRecovery\
SamsungData folder is created on
the corresponding drive (e.g. D:\)
and the data is saved to the folder.
Take care to not delete the folder by
mistake or on purpose.
If you click the Next button, the Data
5
Backup begins. If you have selected
the DVD drive as the Save Path,
the "Enter a blank DVD" message
appears. Insert a blank DVD and click
the OK button.
The "Backup is completed" message
6
appears.
17