Table of Contents
Advertisement
Cancelling operation
Press the stop button twice and use the
off the appliance.
Opening the appliance door during operation
Operation is suspended. After closing the door, press the start
button. Operation will then continue.
Memory
The memory gives you the option to store your own settings
and call them up again at any time. You have two memories
available: "
" and "
". The memory is useful if you prepare
j
k
one dish particularly frequently.
Saving settings in the memory
Press the
button.
Ž
1.
Your appliance is ready for use.
Press the button for the microwave power setting you require.
2.
The display above the power lights up and a suggested
cooking time is displayed.
Set the cooking time using the rotary selector.
3.
Press and hold the
or
j
4.
signal sounds.
The setting is saved and can be started at any time.
Saving another setting
Enter and save the new setting. The old settings are
overwritten.
Notes
The programmes which have been set remain stored even if
■
there is a power cut.
You can also store settings for the grill, MicroCombi mode
■
and the series of operations.
Changing the basic settings
Your appliance has various basic settings which you can
change at any time.
Basic settings
In the table, you will find all the basic settings and options for
changing them.
Basic setting
Clock display
™‚
‚
= on
Signal duration
™ƒ
= medium = 2 minutes
ƒ
Button tone
™„
= on
‚
Waiting time
™...
= medium = 5 seconds
ƒ
Prerequisite: your appliance is switched off.
Press and hold the
0
button for a few seconds.
1.
The first basic setting appears in the display.
button to switch
Ž
button for a few seconds until a
k
Options
Clock display
ƒ
= off
= short = 10 seconds
‚
„
= long = 5 minutes
Button tone
= off
ƒ
= short = 2 seconds
‚
= long = 10 seconds
„
Pausing operation
Press the stop button to pause operation.
Press the start button to continue operation.
Notes
You can also set the grill setting first and then set the
■
microwave power and cooking time.
If you open the appliance door during cooking, the fan may
■
continue to run.
Starting the memory
You can start cooking at any time using the settings saved for
your meal.
Press the
Ž
button.
1.
Your appliance is ready for use.
or ( button.
j
k
2.
The stored settings are displayed.
Press the start button.
3.
The memory setting starts. The
in the display.
Note: Once operation has started, you can no longer change
the memory location.
The cooking time has elapsed.
A signal sounds. The memory function has finished. Use
the
button to switch off the appliance or make new
Ž
settings. You can stop the audible signal by pressing the
button.
Pausing
Press the STOP button or open the appliance door. Operation
is suspended. After closing, press the start button. Operation
will then continue.
Explanation
Displays the clock
Audible signal after the cooking time has
elapsed
Confirmation tone when a button is pressed
Waiting time between two separate steps,
after setting
You can change the basic setting by turning the rotary
2.
selector.
x
cooking time counts down
0
9
Advertisement
Table of Contents
