Setting The Signal - Siemens WS12K261HK Instructions Manual

M

Setting the signal

S e t t i n g t h e s i g n a l
1. Activate setting mode for the signal volume
turn to Off
2. Set the volume for the button signals (depending on model)
press the button until the required volume is
reached
3. Set the volume for the information signals
rotate it one step to the
right
hold down the button and turn one
position to the right
press the button until the required volume is
reached
Press and hold the button for approx. five
seconds until the display elements light up.
Setting mode is activated.
go to point set to Off, which exits setting mode for the
3. or signal volume
Setting the signal
set to Off, which exits setting
mode for the signal volume
en
21