Hose And Cable Lengths - Siemens WS12K261HK Instructions Manual

Take the hoses out of the holders.
1.
Take hoses out of the elbow and
2.
remove elbow.
Unscrew and remove all four
3.
transport brace screws.
Remove the mains cable from the
4.
holders. Remove sleeves.
Insert covers.
5.
Lock the covers firmly in
Note:
place by applying pressure to the
snap-in hooks.
Positioning and connecting

Hose and cable lengths

Connection on left side
or
Connection on right side
If the hose holders are used, the
Note:
possible hose lengths are reduced!
The following are available from
Tip:
specialist dealers/after-sales service:
Extension for Aqua-Stop or cold
■
water inlet hose (approx. 2.50 m).
Order no. WZ10130
A longer supply hose (approx. 2.20
■
m) for standard model.
en
33