Table of Contents
Advertisement
Add standard detergent to
10.
dispenser II according
to manufacturer's instructions for
light soiling.
To prevent frothing, use only
Note:
half the recommended amount of
detergent. Do not use any woollens
or mild detergents.
Close the detergent drawer.
11.
Select ! Start/Reload.
12.
At the end of the programme set the
13.
programme selector to Off.
Your washing machine is now ready to
use.
Transportation
Preparatory work
Turn off the tap.
1.
Reduce the water pressure in the
2.
supply hose. Cleaning and
maintenance – Clean the water inlet
filter ~ Page 24
Drain the remaining detergent
3.
solution. Cleaning and maintenance
– Drain pump blocked ~ Page 23
Disconnect the washing machine
4.
from the mains.
Remove the hoses.
5.
Installing transportation protection
devices:
Remove the covers and keep in a
1.
safe place.
If required, use a screwdriver.
Positioning and connecting
Insert all 4 sleeves.
2.
Clamp the mains cable on the
holders. Insert and tighten the bolts.
Before switching on the appliance:
Notes
The transport locks must be
■
removed! ~ Page 32
To prevent unused detergent from
■
flowing into the outlet during the next
wash: Pour 1 litre of water into
dispenser II and start the 0 p Spin/
Empty programme: (if only
a drained cycle is required: set rpm
(spin speed) to - - -).
en
37
Advertisement
Table of Contents
