Problem Solving Guide - Miele H 5088 BM Operating And Installation Instructions

Miele|home SuperVision

Problem solving guide

Fault
The InfoControl unit
does not appear in
the list of signed on
appliances.
Communication
enabled appliances
do not appear in the
list of signed on
appliances.
The "SuperVision"
option is not listed in
the main menu.
You cannot resolve the problem.
Please contact your Miele Dealer or the Miele Customer Contact Centre.
Other fault messages
Please refer to the Miele|home installation instructions supplied with your
communication module for information on other fault messages which can occur
during the installation of the Miele|home system or during the signing on and off
procedures on a Miele|home enabled appliance/master appliance.
72
Possible cause
This is not a fault. The
InfoControl unit does not
appear in the SuperVision
display.
The signing on procedure
has not been carried out
on the communication
enabled appliance.
There was a problem when
installing the SuperVision
appliance retrospectively.
The display options have
been changed
The SuperVision appliance
has not been signed on to
Miele|home.
There was a problem when
installing the SuperVision
appliance retrospectively.
Remedy
Repeat the signing on process
on the SuperVision appliance
and on the communication
enabled appliance.
Select the option to update
signed on appliances under
"Settings - Miele|home" on the
SuperVision appliance.
Select the option "Display
options - display SuperVision"
under "Settings - Miele|home"
on the SuperVision appliance.
Repeat the signing on
procedure.
Select the option to update
signed on appliances under
"Settings - Miele|home" on the
SuperVision appliance.