Program Operation; Cleaning And Maintenance - Sandstrom S10GC13E Instruction Manual

Program Operation

You can programme your coffee maker to switch on at a set time using the Program
operation. For example if you want to wake up and have your coffee ready you can set the
coffee maker to switch on at 7:30 am or any other time.
GB
Ensure the clock has been set to the correct time. Remember it's a 24 hour clock. Please refer to the
section "Setting the Clock" for details.
Press and hold the Program button until the programme indicator flashes.
1.
Select the time you want coffee to start brewing by using the Hour button, then the
2.
Minute button, following the same instructions for setting the clock.
3. If you want to make coffee with whole beans, set the coffee bean quantity and
strength. Please refer to the section "Operation - Making Coffee with Whole Beans"
steps 6-7.
OR
If you want to make coffee with ground coffee, press the
switch to pre-ground coffee mode.
Press the Program button to confirm the setting. The programme indicator will light
4.
up solidly.
5. After setting the Program start time, prepare coffee following the section "Operation"
steps 1 to 5.
6. The coffee maker will automatically begin brewing at the preset time.
7. To reset the Program time for the same preset time for the next day, simply press the
Program button.

Cleaning and Maintenance

Be sure to unplug and allow this appliance to cool down before cleaning. To protect against electrical
shock, do not immerse the mains cable, mains plug or the appliance in water or liquids. After each use,
always make sure the mains plug is removed from the mains socket.
1. Clean the filter, jug and jug lid after each use in hot, soapy water. They are NOT
dishwasher proof.
2. Wipe the appliance's exterior surface with a soft, damp cloth to remove stains. Do not
use strong detergents or aggressive cleaners.
3. Water droplets may build up in the area above the filter and drip onto the product
base during brewing. To control the dripping, wipe off the area with a clean, dry cloth
after use.
4. Use a damp cloth to gently wipe the warming plate. Never use abrasive cleaners to
clean it.
18
Pre-Ground button to