End Time - Smeg SAWS 1014 User Manual

C
Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before
starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active.
For example, if you want to select Quick Wash after you have selected the Additional Water, Additional Water will be canceled
and Quick Wash will remain active.
An auxiliary function that is not compatible with the programme cannot be selected. (See, "Programme and consumption
table")
Some programmes have auxiliary functions that must be operated simultaneously. Those functions cannot be cancelled. The
frame of the auxiliary function will not be illuminated, only inner area will be illuminated.
• Prewash
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy, water,
detergent and time.
• Rinse Plus
This function enables the machine to make another rinsing in addition to the one already made after the main
wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be effected by the minimal detergent
remnants on the laundry can be reduced.
• Quick Wash
This function can be used in Cottons and Synthetics programmes. It decreases the washing times and also the
number of rinsing steps for lightly soiled laundry.
C
When you select this function, load your machine with half of the maximum laundry specified in the programme table.
Time display
Remaining time for the completion of the programme while it is running is displayed as "01:30" in hours and
minutes format.
C
Programme time may differ from the values in the "Programme and consumption table" depending on the water pressure,
water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected and the
changes at the mains voltage.

4.3.9 End Time

With the End Time function, the startup of the programme may be delayed up to 24 hours. After pressing End
Time button, the programme's estimated ending time is displayed. If the End Time is adjusted, End Time
indicator is illuminated.
In order for the End Time function is activated and the programme is completed at the end of the specified
time, you must press Start / Pause button after adjusting the time.
If you want to cancel End Time function, press On / Off button to turn off and on the machine.
C
Do not use liquid detergents when you activate End Time function! There is the risk of staining of the clothes.
1 Open the loading door, place the laundry and put detergent, etc.
2 Select the washing programme, temperature, spin speed and, if required, the auxiliary functions.
3 Set the end time of your choice by pressing the End Time button. End Time indicator illuminates.
Washing Machine / User's Manual
88
C
0
88:88
1888
88
C
0
88:88
1888
19 / EN