Recording A Conversation; Playing Back A Recorded Conversation - Panasonic KX-TS730 Operating Instructions Manual

Recording a conversation

The total recording capacity is about 120 minutes.
A maximum of 64 items can be recorded.
L If 64 items have been recorded,
conversation recording memory will
become full even if the total recording
time is less than 120 minutes.
1
Press {REC.} ({F1} key), while talking.
L When recording starts, the remaining
recording time will be displayed in
minutes for about 3 seconds.
"-2way recording-" will be
displayed while recording.
L If the remaining recording time is less
than 6 minutes, the IN USE indicators
will flash slowly in amber and green,
and the remaining time will be
displayed as shown below:
Remaining time
less than 6 minutes → Remaining:5min
less than 5 minutes → Remaining:4min
less than 4 minutes → Remaining:3min
less than 3 minutes → Remaining:2min
less than 2 minutes → Remaining:1min
1
less than 1 minute*
1
* When recording starts, the remaining
recording time will be displayed in seconds
for about 3 seconds.
L If mute is on, the IN USE indicators flash
in red.
2
To stop recording, press {STOP}.
L If memory becomes full, "
full" will be displayed. To record
additional conversations, erase
unnecessary conversations.
Using the AUDIO OUT jack
L Conversations are also routed through
the AUDIO OUT jack. This allows you to
connect recording equipment (cassette
recorder, computer, etc.) and record
For assistance, please visit http://www.panasonic.com/consumersupport
Display
→ Remaining:0min
Memory
AUDIO OUT jack
Recording a conversation
conversations without using the unit's
recording memory.
L Recorded conversations are also routed
through the AUDIO OUT jack during
playback.
L Connect "AUX IN" or "LINE IN" jack of
recording equipment using an optional
audio cable with a 3.5 mm mono plug.
Many states have imposed regulations
on the manner in which 2-way telephone
conversations may be recorded, so you
should inform the other party that the
conversation is being recorded. Consult
your telephone service provider for
further information.
L For Call Waiting service users
If you receive a call during recording,
perform the following to answer the 2nd
call:
– If you do not want to record the 2nd
call, press {STOP}, then press
{FLASH}.
– If you want to record the 2nd call,
press {FLASH}. The unit continues
recording.
Playing back a recorded
conversation
{<} {>}
{*} (< REPEAT)
{STOP}
When conversations have been recorded,
" " and the total number of recorded
conversations are displayed while the unit
is in standby mode.
Press {PLAY} ({F1} key).
{#} (SKIP >)
{0} (22)
#1 Play
00:00:01
22
< >
21