Scene Mode - Panasonic DMC-LZ8 Operating Instructions Manual

Scene Mode

Set the recording/playback switch to
[ ]
(P18).
When you select a scene mode to match
the subject and recording situation, the
camera sets the optimal exposure and hue
to obtain the desired picture.
• Refer to P56 to 60
modes.
1 Turn the mode dial to match
[SCN].
• If you set [SCENE MENU] in SETUP
menu to [OFF], the previous scene mode
is set.
2 Press e/r/w/q to select the
scene mode.
SCENE MODE
BABY1
SELECT DISPLAY
3 Press [MENU/SET].
Press [MENU/SET], q and then perform
steps 2 and 3 to change the scene mode.
Advanced-Shooting
for details about the
SET
Scene mode help [
■
• To see explanations about the scene
modes, press [DISPLAY] while a scene
mode is selected in step 2. Press again
to return to the scene mode menu.
INFORMATION
BABY1
Suitable for taking pictures
of your baby.
Age can be displayed
with pictures if you set
the birthday.
CANCEL
• Refer to P45
• Flash settings return to the factory
settings when you change the scene
mode despite it remains still even if the
camera is turned off.
• The colour of the picture may seem
strange if you use a scene mode that is
unsuitable for the shot.
• When you press [MENU/SET] to display
the menu screen, then you can move to
the REC mode menu, SETUP menu, etc.
Select [ ] icon with w and select [
(REC mode menu) or [
with r Next, press q. (Recording menus
that can be set depend on the scenes.)
• The following cannot be set in scene
mode.
– [INTELLIGENT ISO]
– [SENSITIVITY]
– [METERING MODE]
– [COLOR EFFECT]
– [PICT.ADJ.]
-  -
INFORMATION]
SET
for the shutter speed.
] (SETUP menu)
]