[Text Stamp] - Panasonic DMC-LZ8 Operating Instructions Manual

Press [ ] to display the [PLAYBACK] mode menu and select the item to set.
Delete the title (for [SINGLE] only)
■
In step 2 when [SINGLE] is selected,
1.
delete all the texts, select [EXIT], and
press [MENU/SET].
2. Press [ ] twice to close the menu.
• Registered text can be displayed on the
screen of this unit. (Displayed on slide if
too many texts are input.)
• The name setting of [BABY] or [PET]
mode can be registered by using the
same operation as "Single setting".
However, the name setting and [TITLE
EDIT] cannot be registered at the same
time.
• You can use the software
[PHOTOfunSTUDIO-viewer-] on the
CD-ROM (supplied) to print the text
(comments). For details, refer to the
operating instructions (PDF file) of the
software.
Example of text entry
In case of entering [LUMIX]:
1 Move e/r/w/q to move the cursor to
[L] and then press [MENU/SET].
2 Move e/r/w/q to move the cursor to
[U] and then press [MENU/SET].
3 Move e/r/w/q to move the cursor to
[M] and then press [MENU/SET].
4 Move e/r/w/q to move the cursor to
[I] and then press [MENU/SET].
5 Move e/r/w/q to move the cursor to
[X] and then press [MENU/SET].
Advanced-Viewing

[TEXT STAMP]

Stamping the text on your
pictures
You can stamp the set text, date and time
of recording, the age and the travel date on
the recorded pictures.
This function is suitable when you print
4˝ × 6˝/10 × 15 cm images. (Images are
resized when you add the text to the
pictures taken with a resolution of more
than [ ].)
Select [
playback menu (P86).
Common operation
■
Press e/r to select [SINGLE] or
[MULTI] and press [MENU/SET].
PLAYBACK
SELECT
• You cannot add the texts or the date to
the following images.
– Images taken when the clock is not set
– Images that already have texts on them
– Motion pictures
– Images recorded with other equipment
Single setting
■
After the common operation
1 Press w / q to choose a picture,
then press [MENU/SET].
TEXT
STAMP
CANCEL
-  -
TEXT STAMP] from
CALENDAR
CAL
TITLE EDIT
SINGLE
TEXT STAMP
MULTI
RESIZE
TRIMMING
SET
10
M
100-0001
1/19
A
SELECT SET
(P86)
MENU
SET
MENU
SET