Playing Back Music Files On The Dlna Server - Panasonic SC-NE3 Operating Instructions Manual

Display the password
The first time "D.CONNECT" is set to "ON", a
password for this unit's wireless network is randomly
created and memorised in this unit.
≥ This password is memorised until it is changed.
1
While "D.CONNECT" is set to "ON":
Press [SETUP] repeatedly to select
"D.CONNECT".
2
Press [3, 4] to select "ON" and then press [OK].
3
The current password is displayed.
≥ The 5 digits after "PW" is the password for this
network.
4
Press any button to exit.
Change the password
1
While "D.CONNECT" is set to "OFF":
Press [SETUP] repeatedly to select
"D.CONNECT".
2
Press [3, 4] to select "CHANGE PW" and then
press [OK].
3
Press [3, 4] to select "OK? YES" and then press
[OK].
4
The new password is displayed.
≥ The 5 digits after "PW" is the new password for
this network.
5
Press any button to exit.
∫ Note about changing the password
After changing this unit's wireless network password, if
you are not prompted to change the password on the
other devices, the following changes are required.
iOS device (iPod touch/iPhone/iPad)*
≥ Before choosing this unit's network,
1
Select [ ] located beside this unit's wireless
network name.
2
Select "Forget this Network" and then select
"Forget".
3
Select this unit's wireless network and enter the
new password.
Mac/PC:
≥ If the computer has memorised the old password, be
sure to change the memorised password for this
unit's wireless network to the new one.
≥ Refer to the devices's operating instructions for details.
*1: Steps are based on iOS 6.0.1.
10
VQT4U54
Select the playback mode. Perform the settings during
playback.
REPEAT
1
2
SHUFFLE
1
2
≥ Refer to the connected device to verify the selected setting.
≥ The applied settings will remain until it is changed.
Playing back music files on the
DLNA server
You can share music files stored in the DLNA Certified
media server (PC with Windows 7 installed,
smartphone, etc.) connected to your home wireless
network, and enjoy the contents with this unit's
speaker.
Preparation
≥ Complete the network settings. (l 6)
≥ Connect your device with DMC (Digital Media
Controller) compatible software installed to the
same home wireless network as this unit.
≥ Add the contents and folder to the libraries of the
Windows Media
– Playlist of Windows Media
1
:
1
2
∫ Support format of DLNA client
File formats that are not supported by your DLNA
server cannot be played.
≥ Depending on the contents and the connected equipment,
playback may not be possible.
*1: " _ " stands for a digit that is unique to each set.
*2: The name that is displayed for this unit can be changed
Playback modes
Press [PLAY MENU] to select "REPEAT".
Press [3, 4] to repeat one track, all tracks, etc.
Press [PLAY MENU] to select "SHUFFLE".
Press [3, 4] to turn on/off the shuffle function.
Player or the smartphone, etc.
®
only the contents that are stored in the libraries.
Turn the unit on.
≥ Check that the Wi-Fi status indicator lights in
blue.
≥ If it doesn't light in blue, check the wireless
network settings. (l 6)
Operate the DMC compatible device and connect
to this unit.
≥ The device name of this unit will be displayed as
"Panasonic NE3 _ _ _ _ _ _"*
≥ For details on how to use DMC compatible
devices, refer to the operating instructions of the
devices or the software.
Audio codec Example of file extension
MP3
WAV
from the "Edit STEREO SYSTEM name" settings.
(l 8, "Advanced network settings")
Player can play back
®
1, 2
.
.mp3
.wav