Panasonic MC-UL426 Operating Instructions Manual page 30

1 7
2
Place the vacuum in the upright position
standing on the handle.
Reinstall lower plate by (1) aligning the
tabs on the lower plate with the slots in
the nozzle and (2) rotating to installed
position. Ensure tabs
are locked into slots.
Tabs
1
Slots
- 30 -
Motor
Shaft
Belt
Four Screws
1 8
Lay unit on floor bottom up with nozzle
flat.
Install the four screws to the lower plate.
Beater
Bar
End Cap
Groove