High Power Mode - Sanyo SAP-URV246EH Instruction Manual

6. HIGH POWER Mode

18
Operation with the Remote Control Unit (continued)
HIGH POWER mode can be used to increase the output of the indoor unit for
all operation modes except automatic operation.
Press the HIGH POWER button.
The mark appears in the display.
To cancel, press HIGH POWER button again.
• When the HIGH POWER button is pressed, the unit operates at maximum
output for 30 minutes, regardless of the desired temperature. The fan
speed is 1 step above "High".
• HIGH POWER Mode cannot be used when the operation mode is
Automatic Operation.
• When set to High fan speed during heating operation, the
NOTE
fan runs at High fan speed even though the
displayed.
• Depending on the operating conditions, the fan speed may
be increased by a small amount only.
mark is