Remote Control Unit
Installation Position
DO NOT
Mounting the Remote Control
Remote control
Mounting screws
4 x 16 (included)
When Holding the Remote
Control Unit
The remote control unit may be operated either from a non-fixed position or
from a wall-mounted position. To ensure that the air conditioner operates
correctly, DO NOT install the remote control unit in the following places:
•
In direct sunlight
•
Behind a curtain or other places where it is covered
•
More than 8 m away from the air conditioner
•
In the path of the air conditioner's airstream
•
Where it may become extremely hot or cold
•
Where it may be subject to electrical or magnetic noise
•
Where there is an obstacle between the remote control unit and air
conditioner (since a check signal is sent from the remote control unit every
5 minutes)
Before mounting the remote control unit, press the ON/OFF operation button
Unit
at the mounting location to make sure that the air conditioner operates from
that location. The indoor unit should make a beeping sound to indicate that it
has received the signal.
unit mount
To take out the remote control unit, pull it forward.
•
When using the remote control unit and during air conditioner operation,
the transmitter on the remote control unit should be pointed toward the
receiver on the indoor unit.
•
Make sure that there are no objects between the remote control unit and
receiver which could block the signal.
Rear side
Press
Set in
•
To prevent loss of the remote control
place
unit, you can connect the remote
control unit to the mount by passing
a string through the remote control
unit and attachment hole.
Hole
13