Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Brandt AD995XC
Summary of Contents for Brandt AD995XC
- Page 1 COOKER HOOD USE MANUAL INSTALLATION INSTRUCTION AD995XC...
- Page 2 Table of Contents Troubleshooting Symptoms Possible Cause Action • From the Manufacturer Ensure the plug • Specifications Motor does not No electrical supply is connected properly. working Reset circuit breaker. • SAFETY : Read this first ! Aluminum Clean the filters and •...
-
Page 4: Specifications
• Fix the lower parts laterally to the hood body using 2 screws (ST4 X 8). • Dimension Cleaning & Maintenance Model AD995XC 900mm 80mm 470mm 470mm SURFACES : Wash with warm soapy water and a soft sponge. Never use abrasive detergent, scouring pads, steel wool or solvents on any part of this appliance as this will cause irreparable damage. - Page 5 RECIRCULATION MODE AIR OUTLET SAFETY : Read this First ! • Insert the connection extension pieces • Do not connect the appliance if there are obvious signs of transportation Air outlet connection laterally in air outlet connection. damage. • Make sure that the outlet of the extension •...
- Page 6 • This appliance should be connected directly to the fused disconnect (or Aligning the hood body circuit breaker) through flexible, armored or nonmetallic sheathed cop- • Before attaching the hood body, adjust the two screws located on the per cable. hood body mounting points.
- Page 7 Mark the center of the bracket holes and drill φ8mm holes. Insert wall Description of Parts plug in the wall. Secure mounting bracket firmly using 2 (ST5 x 25) AD995XC screws. • Fix the upper chimney cover to both mounting bracket using 2 (M3 x 12) A.
- Page 8 Installation Ducted vs. Recirculation mode Wall drilling and bracket fixing You can choose to install the hood as a ducted or recirculation mode :- • Ducted mode (Vented mode) In the ducted mode, air is drawn into the hood, fat are trapped by aluminum filters.
Need help?
Do you have a question about the AD995XC and is the answer not in the manual?
Questions and answers