Parts identification
CLEAN
DRY
CHARGE
STATUS
Protective cap
Foil frame
3 System outer foil
4 System outer foil release
buttons
5 Inner blades
6 Foil frame release buttons
ES8109_EU.indb
3
SELECT
7 Finger rest
8 Pivot action selector
9 OFF/ON switch
LCD panel
Appliance socket
Trimmer
Trimmer handle
Adaptor (RE7-40)
Power cord
Appliance plug
Self-cleaning recharger
(Referred to as the
"Recharger".)
Detergent cartridge
Water tank
Socket
Water tank cap
Operating environment for the self-cleaning
recharger
Operating temperature:
15-35 °C
Operating humidity:
Less than 95%
•
If you use the self-cleaning recharger in temperatures outside the
above range, the following problems may occur.
-
The time it takes to charge the shaver increases.
-
The recharger stops functioning.
-
The lifespan of the rechargeable battery shortens. (Only when
you use the recharger in lower temperatures.) In this case, the
indicators on the LCD panel will blink twice every second.
•
If the indicators on the LCD panel do not glow, wait for a short
while until it glows.
•
Depending on the environment, the shaver may not dry even if
you select a course that includes the "Dry" function. In this case,
wipe off any drops of water with a dry cloth.
Clean lamp
Dry lamp
Charge lamp
Status lamp
Select button
Cleaning tray
Water level
Soft case
Cleaning brush
Oil
3
2007/07/26
12:00:02