Panasonic KX-TG6021 Operating Instructions Manual page 28

Programming
Feature
Ringer tone
(Base unit)
Talking
CallerID
(Handset)
Talking
CallerID
(Base unit)
Voice prompt
(Change language)
*1 If "System setting" column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller's information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you subscribe to a distinctive ring service (such as IDENTA-RING), select a tone
(tone 1 to 3). If you select a melody, you cannot distinguish lines by their ringers.
*5 The flash time depends on your telephone exchange or host PBX. Consult your
PBX supplier if necessary. The setting should stay at "700ms" unless pressing
{FLASH} fails to pick up the call waiting call.
*6 Generally, the line mode setting should not be adjusted. If "Line in use" is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to "A".
*7 This feature allows the unit to automatically adjust the date and time setting when
caller information is received. To use this feature, set the date and time first.
Alarm
An alarm will sound once for 3 minutes at the set time.
Set the date and time beforehand (page 14).
1
{MENU} i {8}
2
{V}/{^}: "Once" i {Select}
L To turn off the alarm, select "Off". i {Select} i {OFF}
3
Set the desired date and time. i {Save}
4
{V}/{^}: Select the desired ringer tone. i {Save}
L We recommend selecting a different ringer tone from outside call.
5
{OFF}
28
For assistance, please visit http://www.panasonic.com/help
Feature Setting code
code
{0}{*}{1} {1}–{3}: Tone <1>–3
{1}: <On> {0}: Off
{9}
{0}{*}{4} {1}: <On> {0}: Off
{1}: <English>
{0}{8}{2}
{2}: Español
System Page
*1
setting
–
r
– 21
21
r
14
r